
Add to Cart
PIC16F676 Microchip PIC16F6 Series Microcontrollers IC 8bit PIC16 CMOS MCU Integrated circuits PIC16F676-I/SL
PIC16F630/ PIC16F676 14-Pin, Flash-Based 8-Bit CMOS Microcontrollers IC Specification:
Category | Integrated Circuits (ICs) |
Embedded - Microcontrollers IC | |
Mfr | Microchip Technology |
Series | PIC16F |
Package | Tube/REEL |
Part Status | Active |
Core Processor | PIC |
Core Size | 8-Bit |
Speed | 20MHz |
Connectivity | - |
Peripherals | Brown-out Detect/Reset, POR, WDT |
Number of I/O | 12 |
Program Memory Size | 1.75KB (1K x 14) |
Program Memory Type | FLASH |
EEPROM Size | 128 x 8 |
RAM Size | 64 x 8 |
Voltage - Supply (Vcc/Vdd) | 2V ~ 5.5V |
Data Converters | A/D 8x10b |
Oscillator Type | Internal |
Operating Temperature | -40°C ~ 85°C (TA) |
Mounting Type | Surface Mount |
Package / Case | 14-SOIC (0.154", 3.90mm Width) |
Base Product Number | PIC16F676 |
Description:
High-Performance RISC CPU: Only 35 Instructions to Learn - All single-cycle instructions except branches
Operating Speed: - DC – 20 MHz oscillator/clock input - DC – 200 ns instruction cycle
Interrupt Capability
8-level Deep Hardware Stack
Direct, Indirect, and Relative Addressing modes
Special Microcontroller Features:
Internal and External Oscillator Options - Precision Internal 4 MHz oscillator factory calibrated to ±1% - External Oscillator support for crystals and resonators - 5 s wake-up from Sleep, 3.0V, typical
Power-Saving Sleep mode • Wide Operating Voltage Range – 2.0V to 5.5V
Industrial and Extended Temperature Range
Low-Power Power-on Reset (POR)
Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
Brown-out Detect (BOD)
Watchdog Timer (WDT) with Independent Oscillator for Reliable Operation
Multiplexed MCLR/Input-pin
Interrupt-on-Pin Change
Individual Programmable Weak Pull-ups
Programmable Code Protection
High Endurance Flash/EEPROM Cell
100,000 write Flash endurance
1,000,000 write EEPROM endurance
Flash/data EEPROM retention: > 40 years
Low-Power Features:
Standby Current: - 1 nA @ 2.0V, typical
Operating Current: - 8.5 A @ 32 kHz, 2.0V, typical - 100 A @ 1 MHz, 2.0V, typical
Watchdog Timer Current - 300 nA @ 2.0V, typical
Timer1 Oscillator Current: - 4 A @ 32 kHz, 2.0V, typical
Peripheral Features:
12 I/O Pins with Individual Direction Control
High Current Sink/Source for Direct LED Drive
Analog Comparator module with: - One analog comparator - Programmable on-chip comparator voltage reference (CVREF) module - Programmable input multiplexing from device inputs - Comparator output is externally accessible
Analog-to-Digital Converter module (PIC16F676): - 10-bit resolution - Programmable 8-channel input - Voltage reference input
Timer0: 8-bit Timer/Counter with 8-bit Programmable Prescaler
Enhanced Timer1: - 16-bit timer/counter with prescaler - External Gate Input mode - Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected
In-Circuit Serial ProgrammingTM (ICSPTM) via two pins
Environmental & Export Classifications
ATTRIBUTE | DESCRIPTION |
---|---|
RoHS Status | ROHS3 Compliant |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
REACH Status | REACH Unaffected |
ECCN | 3A991B1A |
HTSUS | 8542.32.0071 |
There are full PIC series Microcontroller IC 8-Bit 20MHz 1.75KB (1K x 14) FLASH 14-PDIP such as PIC16F630-I/P PIC16F676-I/P for long term available.Welcome to contact ic@icschip.com