Add to Cart
ATWILC3000 IEEE 802.11 b/g/n Link Controller Module with Integrated Bluetooth 5.0
ATWILC3000 is a single chip IEEE 802.11 b/g/n RF/Baseband/MAC link controller and Bluetooth 5. The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with simple SPI/SDIO-to-Wi-Fi and UART-to-Bluetooth interfaces.
The ATWILC3000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP.
The ATWILC3000 features fully integrated Power Amplifier, LNA, Switch and Power Management.
Implemented in low-power CMOS technology, the ATWILC3000 offers very low power consumption while simultaneously providing high performance and minimal bill of materials.
The ATWILC3000 utilizes highly optimized 802.11-Bluetooth coexistence protocols.
The only external clock sources needed for the ATWILC3000 is a high-speed crystal or oscillator and a 32.768 kHz clock for sleep operation.
The ATWILC3000 can be used in Linux, RTOS or Baremetal Environments.
The ATWILC3000 uses the same driver as the ATWILC1000.
Matching Accessories's Parametrics:
| Bluetooth Standard | 5 |
| Cloud Partner | FALSE |
| External PA Control | No |
| Family | Wi-Fi Link Controller |
| Frequency Range | 2.412-2.472 MHz |
| Interface | SPI, SDIO, UART |
| Operating Temperature Min. | -40 |
| Operating Temperature Max. | +85C |
| Operating Voltage Min. | 2.5V |
| Operating Voltage Max. | 4.2V |
| Package | Surface Mount Module |
| Pin Count | 37 |
| Power Output | 18.5 dBm (802.11b 11Mbps) |
| Rx Current Consumption | 84mA (802.11n MCS7) |
| Tx Current Consumption | 253mA (802.11n MCS7) |
| RF Module | TRUE |
| RF Transceiver | TRUE |
| Input Sensitivity | -90 (802.11g 6Mbps) |
| Sleep Mode Current Consumption | 1.25uA |
| Type | Wi-Fi Module |

Related products ATWILC1000 :
Overviews:
SmartConnect ATWILC1000 is an IEEE 802.11 b/g/n IoT link controller module.
The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.
The ATWILC1000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP.
The ATWILC1000 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The only external clock source needed is a high-speed crystal or oscillator.
The ATWILC1000 can be used in Linux, RTOS or Baremetal Environments.
Features:
ATWILC1000 -IEEE® 802.11 b/g/n Link Controller Module :
IEEE 802.11 b/g/n (1 × 1)
Integrated Power Amplifier (PA) and Transmit/Receive (T/R) switch
Superior sensitivity and range via advanced PHY signal processing
Wi-Fi Direct®, station mode and Soft-AP support
Support for personal and enterprise IEEE 802.11 WEP, WPA and WPA2 security
On-chip memory management engine to reduce host load
SPI and SDIO host interfaces optimized for the Linux OS
Operating temperature range of −40°C to +85°C
Description:
| Category | RF/IF and RFID |
| RF Transceiver Modules and Modems | |
| Mfr | Microchip Technology |
| Series | - |
| Package | Tape & Reel (TR) |
| Part Status | Active |
| RF Family/Standard | WiFi |
| Protocol | 802.11b/g/n |
| Modulation | CCK, DSSS, OFDM |
| Frequency | 2.412GHz ~ 2.472GHz |
| Data Rate | 54Mbps |
| Power - Output | 18.7dBm |
| Sensitivity | -94dBm |
| Serial Interfaces | I²C, SDIO, SPI, UART |
| Antenna Type | Integrated, Trace |
| Utilized IC / Part | - |
| Memory Size | - |
| Voltage - Supply | 1.8V ~ 3.6V |
| Current - Receiving | 63mA |
| Current - Transmitting | - |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 85°C |
| Package / Case | Module |
| Base Product Number | ATWILC1000 |
Images:

The ATWILC1000 and ATWILC3000 are both available in a chip-level solution.Please feel free to contact us for more. sales@icship.com